Sawtooth greenhouses feature vertical vents for growers who do not want to use mechanical ventilation systems. These are best suited for trop, sub-tropic, and desert regions.
Features
- There are two types of roof: sawtooth and half-sawtooth. Vents of the sawtooth roof connect ridges to gutters, while vents of the half-sawtooth roof connect a certain position between ridges and roofing to gutters.
- The vertical walls allow you to install exhaust fans and ventilation windows. Ventilation windows are covered by film, using a film rolling mechanism to open.
- Sawtooth and surrounding walls enable cross-ventilation. If natural wind goes through the vent, it will minimize the cost of ventilation and cooling.
Specification
Frame:
Hot-dip galvanized steel. It enables a fast and convenient installation. Meanwhile, it is also environmentally friendly.
Covering materials:
On the roof：polycarbonate sheets, glass, polyethylene film
On the surrounding：polycarbonate sheets, glass, polyethylene film
Solar shading system: solar shading system inside or outside of the greenhouse is available
Span: 6.4m/8.0m/9m/9.6m/10.8m/12m or customized size
Width: 4m, 8m or customized size
Height: 3m-9m or customized size
Frame load:
Wind load: 0.5kn/m2 or customized load
Snow load: 0.3kn/m2 or customized load
Plant load: 0.15kn/m2 or customized load
Rain load: 140mm3/h or customized load
Custom Solutions
The sawtooth greenhouse is perfect for use as a fruit greenhouse, flower greenhouse and vegetable greenhouse, especially for the cultivation of bananas, oranges, pineapples, strawberries, cucumbers, beans, cilantros, lettuces, etc. We can customize various sawtooth greenhouses and relevant systems and equipment including ventilation systems, irrigation and fertilization systems, soilless culture systems, movable benches and more.