Both McAlpine and Aquaflow pipes can be moulded with heat. Join waste pipes simply and effectively in bathrooms, kitchens, utility rooms and en-suites by using the solvent weld method. Our range of solvent weld pipe and solvent weld fittings are popular with tradesmen and plumbers. We stock a huge selection of solvent weld pipe fittings in a variety of sizes from 30mm to 50mm. Securely attach waste pipe to floors, ceilings or walls using a compatible pipe clip or alternatively, direct the waste pipe around bends or corners with a pipe bend at 90, 92.5 or 135 degrees.

We know that the likes of water pipe, fittings, water meters, hose etc. are not the most glamorous products in the world, but this doesn’t make a difference to us when it comes to customer service. Whether you’re looking for a simple adaptor or specifying a whole pipework system, you’ll get all of our expertise and professional courtesy. Before installation, make sure the valve is in the “open” position and all cemented surfaces are clean and dry.

Push-to-pull fittings are a type of easily removed compression fitting that allows pipes to be connected with minimal use of tools. These fittings are similar to regular compression fittings, but use an O-ring for sealing and a grip ring to hold the pipe. The main advantage is that it can easily be removed and re-used, it is easy to assemble, and the joints are still rotatable even after assembly. The pipe end should be square so it sits against the stop in the fittings and does not create turbulence, and needs to be a clean cut to avoid damaging the O-ring during insertion.

china pipe fitting

This instruction describes the pre-assembly of a cutting ring (SRD…VA) on the stainless steel pipe in the assembly stud and the finishing assembly of the cutting ring in the screw sleeve. Manufacturers such as Victaulic and Grinnell produce sleeve-clamp fittings which are replacing many flange connections. They attach to the end of a pipe segment via circumferential grooves pressed around the end of the pipe to be joined. They are widely used on larger steel pipes, and can also be used with other materials.

Pipe fitting product line includes a large number of fitting types that surpass the requirements of this standard. In these special forms, e.g., pipe fittings with spring-back tolerances, the connector dimensions have been adapted to the pertinent standard, so that they can be replaced at any time. There are various pipe fittings available, each with their own unique function. The materials used in plumbing has changed over the years so we’ve made sure that we offer a comprehensive enough range to cater for both old and new installations. You’ll find pipe fittings from leading brands like JG Speedfit, Plumbsure and Fluidmaster that cover a wide range of fitting types. A nipple is a short stub of pipe, usually male-threaded steel, brass, chlorinated polyvinyl chloride , or copper , which connects two other fittings.

Hydraulic fittings are designed and constructed to resist high-pressure leakage and sudden failure. The diverter tee is designed to allow flow to continue in the main line, even when the side branch is shut down and not calling for heat. Diverter tees have directional markings which must be heeded; a tee installed backwards will function very poorly.

They can be tted either into the screwed joint or into specially made devices. In either case the cutting ring and its edges are moved axially as the union nut is tightened. 900#, 1500#, and 2500# stainless steel flanges are available. Call or email us for those or any custom stainless steel flanges. 18″, 24″, 36″, and 48″ lengths are stocked in addition to the standard stainless steel nipples.

Stainless steel and carbon steel press fittings can hold up to 16 bars of pressure. Many companies and individuals use the abbreviation IPS which normally refers to iron pipe size. When we use the term ‘IPS-sized’, or either Mips or Fips , we are referring to pipes with NPT threads.

Leave a Reply

Your email address will not be published.